Embroidery Problems: Birdsnest

A birdsnest is a common problem that occurs when the bobbin thread gets tangled in embroidery designs. It can be extremely frustrating for sewers and lead to huge delays in their projects. Birdsnests can be caused by many different factors, from incorrect threading of the machine to bad tension settings on the bobbin case. Fortunately, understanding what causes these problems and taking steps to prevent them can help you avoid this all-too-common issue.

One of the most common causes of a birdsnest is improper threading of the machine. This means that either the top or bottom threads are not correctly passed through all necessary guides before being pulled up into position for stitching. If one or both threads are incorrectly threaded, they will become intertwined with each other, leading to tangles and knots as they pass through your workpiece. To ensure proper threading, always double check all guides before starting any project!

Another potential cause of birdsnests is improper tension settings on your bobbin case – if it’s too tight then it won’t allow enough slack in your bottom thread which can lead to knotting and tangling issues. To adjust the tension on your bobbin case, consult your machine’s manual or watch an instructional video. It’s important to make sure you understand how to properly adjust the tension before attempting any embroidery projects.

Finally, birdsnests may also be caused by poor quality threads and needles. A good rule of thumb is to always use high-quality thread that is designed specifically for machine embroidery and make sure your needle size is appropriate for the fabric you’re working with. If you find that you are experiencing a lot of tangles and knots in your work even after adjusting the tension, it may be time to invest in some better quality supplies.